Inserisci la tua mail per essere sempre aggiornato:

Mark1.5 Coilgun

Etichette: , ,


Our friend Daniel Eindhoven from Megavolts has been hard at work improving on the coil gun that we featured here before. The new circuit modifications allows the gun to fire every second now. The new halogen charge resistors look much cooler also.
"At the moment the only limiting factor for fire rate is the charge time, this is the time the capacitor bank takes to get fully charged. This time can be influenced by the charging resistor, a lower value charge resistor will reduce the charge time but increase the charge current.
The first version of the CoilMaster has a 150W bulb as charge resistor, at the time I was pretty fond of the (relatively) short charge time. But I recently realized that it could be improved by a LOT. This upgrade takes charge time to the next level. In stead of one 150W bulb now  2×1000W halogen tubes are used, the entire charge circuit had to be upgraded to handle the peak currents."

Se ti è piaciuto l'articolo, iscriviti al feed per tenerti sempre aggiornato sui nuovi contenuti del blog! Se invece vorresti vedere pubblicato un articolo in particolare mandami una richiesta

Articoli correlati

0 commenti:

Posta un commento